Theme: GreyDragon - v.4.0.2
|
zottel
Joined: 2012-05-22
Posts: 11 |
Posted: Fri, 2012-07-13 06:53
|
|
Hi, since I updated to Gallery 3.0.4, I'm getting lots and lots of strange errors in the logs. This seems to be GreyDragen theme issue because if I change back to Gallery Wind, the errors don't show up. They look like this: 2012-07-13 08:33:36 +02:00 --- error: 2 That doesn't exactly tell me much. ;-) BTW, that's not the log that is shown in the admin interface dashboard, but the log files in var/logs/. The gallery itself works without problems, but whenever an image or thumbnail is loaded (and not loaded from the browser cache) two lines like the above are added to the logs, first error 2, then error 1 (and the log files grow a lot …). My theme is slightly patched to provide wide-mode thumbs that show the whole image for portrait images, but that's only admin/controllers/admin_theme_options.php, so I think it doesn't have anything to do with it? I'm using GreyDragon v3.2.2. Platform information: Operating system: Linux 2.6.32-5-amd64 Any hints what might cause this? Thanks, zottel |
|
|
GuWeHa
Joined: 2008-01-20
Posts: 28 |
Posted: Sat, 2012-07-14 08:20
|
|
Hi folks, first I thought the solution wouldn't be of any interest here in this forum because nobody answered me. Well, because of the answer of Serge I know there is at least one who is interested in. So let's go ahead and describe the reason for the malfunction itself and its solution, of course! May be anyone could spare some time in not making the same mistake(s) like me ;-) But, the description will become a little bit longer, be warned! I'm running several physical servers on the internet and at home. On this machines which all run Debian Squeeze 64 with OpenVZ kernel I'm running several virtual hosts also with Debian Squeeze 64 and different applications, for example ftp, ntp, smtp, ..., LAMP with Gallery2/3 and so on. Normally I'm doing my development on a virtual server at home and then transfer the result or the complete VM to the Server on the web. But, because I head to different Gallery 2 instances running on VM's on the web I decided to take over the pictures from my Gallery 2 installations directly to the Gallery 3 test installation. Because there are a lot of pictures and I'm attached to the web by a very slow DSL connection I decided to built up and run my Gallery3 develop environmet VM directly on the web this time. On the same physical hardware where my Gallery 2 implementations (VMs) are running. But, with separate IP address. Not wanting to show my experiments on building my me Gallery3 site to the rest of the world until it's ready for launch I decided to control the access to the new Gallery3 site by Apache itself. I have to say that I'm using dedicated Apache virtual hosts for each Gallery installation. In former times I accessed my webservers from a unique IP address because I own an official /29 subnet at home. At that time I could reduce the access to my Gallery server to one of my specific IP addresses from this subnet by "Allow from 9.8.7.6". But, since a few month my traffic consumptive http-traffic is running over another ISP which assigns me a "fresh" IP address onces a day. So the method described in last paragraph wouldn't work for me anymore. Therefor I decided to protect my Gallery3 site access during building by Apache mode-auth. On first view this work fine for me. I first had to log in to Apache and then I can use all things from Gallery - instead of the slideshow on rootpage! As you know I did several hours of reading, searching and a lot of experiments to fix this strange behavior without any positive result. So I decided to move the complete Gallery3 VM to one of my servers at home and to go ahead from there, having several ideas for further checks which could be done more easy at home because of the other environment. Of course, at home I don't need weather mod-auth nor "Allow from 9.8.7.6" in the Apache virtual host's configuration. So I commented these paragraphs. Having done so, the slideshow on rootpage was working directly. I was totally astonished, really! Great! But why? For research I moved back to my Gallery3 test VM on the internet. I disabled all mod-auth settings set "Allow from 1.2.3.4" (currently assigned ip address at home) instead of this. Fuck (excuse me) - slideshow again not runnig! But browser access to RSS feeds works great! Confused again Well I found the reason in the access log of my Apache virtual host: 1.2.3.4 - - [12/Jul/2012:10:19:11 +0200] "GET /themes/greydragon/css/colorpacks/carbon/images/colorpack.png HTTP/1.1" 200 583 "-" "Mozilla/5.0 (Windows NT 6.1; rv:13.0) Gecko/20 5.6.7.8 - - [12/Jul/2012:10:19:34 +0200] "GET /rss/feed/gallery/album/18 HTTP/1.0" 403 414 "-" "-" Where 1.2.3.4 is the ip addres of my webbrowser at that time and As you see, browser access works fine (because IP address 1.2.3.4 was allowed). But, what I didn't know so far was the Gallery3 server itself (5.6.7.8) tries to connect to it's own RSS feeds addresses using his own ip address (5.6.7.8). Before then I thought it would directly access the local directory (i.e. where the photos are located on the server) which I choose as relative path (i.e. without leading http://<server name>) in the GD theme admin module page in the root page section for slideshow. Anyway, what I had to do was to set " Allow from 5.6.7.8 1.2.3.4". Having done so the slideshow works fine for me on Gallery3 VM located at the Internet too And second, my first try with mod-auth won't ever work because on the browser you can do/type your authentication (user/password) but not in Gallery3 itself (for using RSS feeds for slideshow (may be I'm wrong, but I don't know where to set these values)). Again, thanks for your interest and for reading. May be, this post will help anyone sparing time on not making the same errors like me ;-) Greetinx GuWeHa |
|
|
Dmitry_N
Joined: 2012-07-13
Posts: 3 |
Posted: Fri, 2012-07-13 14:35
|
|
Hi, Sorry for my poor English, but I need help to eliminate strange GD behavior. It is possible to reproduce strange GD behavior on this URL: www.nda.org.ua/gallery/ When error occurs any logs (Gallery or Apach) is clean. Platform information: Thanks for any possible help! Dmitry |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Sat, 2012-07-14 00:28
|
|
GuWeHa wrote:
Hi folks, Wow! This was intense. Glad you have resolved the issue Serge |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Sat, 2012-07-14 00:43
|
|
Dmitry_N wrote:
Hi, I can see the issue on your site Serge |
|
|
Dmitry_N
Joined: 2012-07-13
Posts: 3 |
Posted: Sat, 2012-07-14 09:39
|
|
Hi, Serge D! Thank you for taking time to my problem. Dmitry |
|
|
floridave
Joined: 2003-12-22
Posts: 27300 |
Posted: Sun, 2012-07-15 00:11
|
|
GuWeHa wrote:
I own an official /29 subnet at home. Now you definitely fit in less than the 20% of the 80/20 rule. Dave _____________________________________________ |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Mon, 2012-07-16 18:28
|
|
Dmitry_N wrote:
Thank you for taking time to my problem. Please try attached file - replace one from views folder from your error log Serge |
|
|
Dmitry_N
Joined: 2012-07-13
Posts: 3 |
Posted: Mon, 2012-07-16 23:41
|
|
Serge D wrote:
Please try attached file - replace one from views folder from your error log Hi, Thank you, great job! But there's another small problem. Earlier, with old version of the file (or now, with default theme), when tag selection or search returns some previews and previews are opens, in the top area of full view was seen references to found pages (like "Page: 1-2-3", I think this have name "Paginator area") and were present navigation buttons. With new version of the file, it is missing, and only for a tag selection, or search condition, that did not work in old version of the file. Slide show display all of found pages fine. When I select whole album, "Paginator area" and navigation buttons are available and works. You may reproduce described above by selecting, for example, tag "Прочее" and clicking any preview, which is not an album on https://www.nda.org.ua/gallery/. If you select, for example, tag "Цветы" or "Природа", all works fine, as previously. IMHO, the described above is not critical, but I think this somewhat reduces the functionality of the best theme for Gallery. With best regards, |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Tue, 2012-07-17 18:17
|
|
Dmitry_N wrote:
But there's another small problem. Earlier, with old version of the file (or now, with default theme), when tag selection or search returns some previews and previews are opens, in the top area of full view was seen references to found pages (like "Page: 1-2-3", I think this have name "Paginator area") and were present navigation buttons. With new version of the file, it is missing, and only for a tag selection, or search condition, that did not work in old version of the file. Slide show display all of found pages fine. When I select whole album, "Paginator area" and navigation buttons are available and works. Let me confirm what you are asking about... Clicked https://www.nda.org.ua/gallery/tag/3/%D0%9F%D1%80%D0%BE%D1%87%D0%B5%D0%B5 - прочее - it did open fine and there is reference "Page: 1-2". Serge |
|
|
ccreep
Joined: 2012-07-19
Posts: 1 |
Posted: Thu, 2012-07-19 11:03
|
|
Hello. Could you, please, help me with the following issue. Error from log: Nevertheless the rotate procedure works well. |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Sun, 2012-07-22 01:37
|
|
I upgraded to the Greydragon theme version 3.2.2 from around 2.3.1 I think, the files were dated 8/27/10 if that helps. Everything works except I don't have a login at the bottom of the screen. I had downloaded the greydragon shared module and unzipped it to the Gallery Modules folder. It is a greydragon file after it was unzipped. And the Add and Admin menu's do not work, just getting a # sign. The site is www.barryfowler.org/gallery3/index.php I can get to the admin screen by typing in "admin" after index.php I did not understand exactly where to the put the greydragon shared modules download, so I put it in the Modules folder and I am guessing that is where the problem is. What step did I miss? I've been using this theme since 2010 as stated and it is a great theme, thanks for designing it. |
|
|
floridave
Joined: 2003-12-22
Posts: 27300 |
Posted: Sun, 2012-07-22 05:38
|
|
Your screen.css has: Dave _____________________________________________ |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Sun, 2012-07-22 13:56
|
|
How do I change that, I can't find the option? The old file shows the same thing. I upgraded in hopes the Organizer would work. Also, looks like the Wind theme works fine, even the Organizer, neat! So I don't know what is going on with the greydragon theme, I did not see where to activate the greydragon module although it is in the Modules panel and check marked. |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Sun, 2012-07-22 15:29
|
|
OK, I think I see it. Looks like I have the old theme, when loading the new one the site is blank and the prerequisites says I need "Gallery 3 Core v.49 check failed . Minimum required version is 49. found 30" I'll see what I need to do here, then.... Uh Oh! Tried to upgrade Gallery3 and I am getting this "Gallery is not supported on Windows (PHP reports that you're using: WINNT)" Now everything is down.......... |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Sun, 2012-07-22 15:53
|
|
OK, Guys! I think I am back in business, went to Gallery 3.0.3 and looks like everything is OK. Guess I should have messed around with it instead of panicking.....Oh well! Thanks, |
|
|
zottel
Joined: 2012-05-22
Posts: 11 |
Posted: Mon, 2012-07-23 06:26
|
|
Is nobody seeing the same erors I see? (See post above.) |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Mon, 2012-07-23 18:19
|
|
floridave wrote:
Your screen.css has: @Dave: I do keep login hidden until JS is loaded @Bearskin: do you have latest version of shadowbox module? Serge |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Mon, 2012-07-23 18:21
|
|
zottel wrote:
Is nobody seeing the same erors I see? (See post above.) I see it since I have updated to latest G3. I do not know yet, what causing it Serge |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Mon, 2012-07-23 22:27
|
|
Serge, Looks like I have shadowbox version 1.4 |
|
|
zottel
Joined: 2012-05-22
Posts: 11 |
Posted: Tue, 2012-07-24 06:29
|
|
Ok, thanks for the confirmation, Serge. It's not that bad as everything is working, just wanted to know if this is "normal" or only happening at my site. |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Wed, 2012-07-25 01:38
|
|
I upgraded Shadowbox to v1.9 It appears when visitors click on the photo for the third and larger display that the photo is the same size as when you select it the second time. In Admin I can click on the photo the third time and it pops up the bigger screen for the largest viewing of the photo. Hope I make sense. Anyway how do I allow the visitors to see the photo at full screen size? I can't find the option, tried a few things but no luck as of yet. Other than that all is well..... Thanks |
|
|
bigu_c
Joined: 2007-10-28
Posts: 421 |
Posted: Wed, 2012-07-25 15:55
|
|
Hi, Why I can't set body width limited to 850px? In an additional question: Its easy to change sidebar width to 250px? Thanks. |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Thu, 2012-07-26 20:43
|
|
Bearskin wrote:
Hope I make sense. Anyway how do I allow the visitors to see the photo at full screen size? I can't find the option, tried a few things but no luck as of yet. Under permissions, allow "View Full Size" for regular visitors Serge |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Thu, 2012-07-26 20:45
|
|
bigu_c wrote:
Hi, * depend on frame pack, some of them not designed for small screens with high number of thumbs in the row * yes, you can change sidebar size via CSS Serge |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Thu, 2012-07-26 21:40
|
|
Serge, I can't find Permissions anywhere? Oh, ok, I have to change the theme to "wind" and then edit permissions and then change it back to "greydragon". Gotcha, sorry! Thank You Kind Sirs! |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Thu, 2012-07-26 22:25
|
|
Bearskin wrote:
Serge, I can't find Permissions anywhere? strange, you should be able to adjust permissions Serge |
|
|
Bearskin
Joined: 2012-07-22
Posts: 8 |
Posted: Fri, 2012-07-27 21:25
|
|
Gee sorry Serge, It is there under Album Options-Edit Permissions for the greydragon theme, I was only on the Admin and checking everything there. It's been so long since I have done anything except upload pics, I have forgotten all this.... |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Mon, 2012-07-30 16:36
|
|
Good Serge |
|
|
mattdm
Joined: 2005-07-22
Posts: 181 |
Posted: Tue, 2012-07-31 00:52
|
|
A minor feature request: I find the Paginator numeric links very distracting on the Photo Page, so I used css to hide them (leaving the graphical buttons). But, this makes it impossible to find one's way around albums which have more than one page. Conversely, the graphical buttons are less useful on album pages, but nice on the photo page. I think adding an option to make these display separately might be overkill, but I wonder if maybe you'd be open to labeling the paginator differently in the css on album pages and photo pages? |
|
|
mattdm
Joined: 2005-07-22
Posts: 181 |
Posted: Tue, 2012-07-31 00:58
|
|
Oh, and another small request: for Title Source, there's "Title/Suppress Filenames", but this causes titles like "Photo 2424" to appear. The same happens with Description for photos without a description. If there's not something I'm missing, could there maybe be a way to suppress the display of this Photo ### label when the given source is blank? Thanks for all your work on this great and very flexible theme. |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Tue, 2012-07-31 20:00
|
|
mattdm wrote:
A minor feature request: I would stay away adding the options, but would be open to extend CSS targeting. Suggestions? Serge |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Tue, 2012-07-31 20:05
|
|
mattdm wrote:
Oh, and another small request: for Title Source, there's "Title/Suppress Filenames", but this causes titles like "Photo 2424" to appear. The same happens with Description for photos without a description. If there's not something I'm missing, could there maybe be a way to suppress the display of this Photo ### label when the given source is blank? This is intended behavior. Mode is used when people simply upload files without properly setting captions. "Photo" comes from the type of the thumb and 2424 is item's ID... This only happens when Caption = File Name, exactly what option outlines. Serge |
|
|
mattdm
Joined: 2005-07-22
Posts: 181 |
Posted: Tue, 2012-07-31 20:35
|
|
Serge D wrote:
Sure — simply put some additional css class name on the g-navigation li, and have it differ in album view and photo view. I don't care what it's called. |
|
|
mattdm
Joined: 2005-07-22
Posts: 181 |
Posted: Tue, 2012-07-31 20:41
|
|
Serge D wrote:
But the mode is a global option. I would like titles which do exist to show up, and when title doesn't exist, I'd like it to show nothing rather than generating some text. |
|
|
Jookyn
Joined: 2012-07-31
Posts: 1 |
Posted: Tue, 2012-07-31 21:59
|
|
Hello Serge, I would like to ask how works view counts for photos when photo page is disabled and photos are opened in SB/FB directly from album page. View counts for albums are ok but almost all my photos have 2 or 3 views (for example in album at http://photoondra.com/Racing/Rally/2012-07-Rally-Bohemia ). I tried to look in gallery/GD theme implementation, I found that view count increment is made from Photos_Controller, but this controller is not called when photo page is disabled (hope I'm not wrong). I understand that counting views in this case is not easy (maybe even impossible), but I'd like to know where my 2 or 3 views of comes from... Im running Gallery 3.0.4 and I made yesterday update to GD 3.2.2 (before I was running 3.1.2 for about 5 months). |
|
|
undagiga
Joined: 2010-11-26
Posts: 693 |
Posted: Wed, 2012-08-01 12:07
|
|
Serge I'm currently and belatedly upgrading to the latest version of Gallery3 and Greydragon and the Tag Albums module, and I find that tags and tab albums are not working as they should in Greydragon 3.2.2 and Gallery 3.0.4, but they are working in the default Wind theme. I've created a duplicate of my site for testing which I will PM you. Because the symptoms relate to tag navigation, I've described my problems in the Tag Albums thread here. I will PM you my test site. U-G |
|
|
dwdallam
Joined: 2006-11-19
Posts: 394 |
Posted: Thu, 2012-08-02 22:55
|
|
How do I update the GreyDragon theme without losing my current settings? |
|
|
mervyngroves
Joined: 2008-08-03
Posts: 92 |
Posted: Fri, 2012-08-03 19:36
|
|
Gallery 3.04/Greydragon 3.2.2. Modified custom.css to exclude the By: Admin and just show the view count. All was working fine, http://www.grovesonline.com/gallery3_6/index.php/Clifden-Day-5 Uploaded a new album, http://grovesonline.com/gallery3_6/index.php/August-in-the-Courtyard and now the By: Admin appears and the view count is gone? custom.css Quote:
.g-metadata li { display: none; } |
|
|
hareslade
Joined: 2006-07-16
Posts: 20 |
Posted: Wed, 2012-08-08 13:22
|
|
I've edited this on 8th august because i see bluehost my host is running php 5.2 Hi, Serge D may i say greydragon is an amazing theme, i have it running with gallery 3.0.4 ...php 5.2 runs greydragon ok, but php 5.3 causes a server internal error when i try to activate greydragon, whereas the standard theme runs ok. I don't want too much attention ! But i wondered if you can locate what in php 5.3 might cause internal server error due to code in greydragon? I originally had total internal server error after gallery3 install on falcoda, but I cleared the 'segmenting errors' caused by kohana [in kohana.php] with a bit of code thats available, apparently the zend guard in php 5.3 isn't compatible with the gallery3 kohana version. ...but sadly after fixing the kohana prob and getting gallery3 to run, the server error returned when I tried to activate the greydragon theme. So the gallery end fails too. OK i can revert to php 5.2, greydragon seems to run ok with that. just to emphasise, on bluehost host i don't have any probs whatsoever, so possibly theres another side effect of zend guard with php 5.3 which comes up with the falcoda host, that grey dragon runs into, and causes the internal server error. Or maybe its a known effect of greydragon sometimes, on 5.3 generally. hope this makes sense. i'm not sure how to do debug. |
|
|
mervyngroves
Joined: 2008-08-03
Posts: 92 |
Posted: Sat, 2012-08-04 15:49
|
|
Some testing this morning suggests that when you disable photo pages ( Slideshow mode using Shadowbox) the view count is not incremented. This seems to have happened since the upgrade to 3.0.4. |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Sun, 2012-08-05 01:58
|
|
hareslade wrote:
Hi, Serge D may i say greydragon is an amazing theme, i have it running with gallery 3.0.4 on bluehost host perfectly, but on another host falcoda, that has zend guard installed, php 5.2 runs greydragon ok, but php 5.3 causes a server internal error when i try to activate greydragon, whereas the standard theme runs ok. look for local.php I have posted earlier. it would allow you to enable error log. Serge |
|
|
Serge D
Joined: 2009-06-11
Posts: 2466 |
Posted: Sun, 2012-08-05 02:00
|
|
mervyngroves wrote:
Some testing this morning suggests that when you disable photo pages ( Slideshow mode using Shadowbox) the view count is not incremented. This seems to have happened since the upgrade to 3.0.4. could be a case as slideshow does not show a full page but using image references instead Serge |
|
|
mattdm
Joined: 2005-07-22
Posts: 181 |
Posted: Mon, 2012-08-06 03:04
|
|
mattdm wrote:
Looks like shoehorning it into add_paginator in libraries/MY_Theme_View.php might work.... |
|
|
hareslade
Joined: 2006-07-16
Posts: 20 |
Posted: Thu, 2012-08-09 21:38
|
|
hello Serge D, in response to your reply above on my prob, I have local.php installed and I can only see a general error being created in the cpanel error log, my host says they don't have anything more detailed for php errors Premature end of script headers: index.php, referer: http://www.***.co.uk/g3/index.php/admin/themes for when I select greydragon theme using php 5.3.10 At gallery end I get same internal server msg too, but the above error listed, reduces to just Sorry I can't be more precise. [yet] also of course in the start I had to modify kohana.php as I said in my post earlier, but that only clears the fault that was associated with segments, it presumably has no relevence on what i'm seeing now with php 5.3.10 and greydragon, as that first prob was related specifically to the zend guard version on php 5.3x. |
|
|
bonbin
Joined: 2012-07-24
Posts: 1 |
Posted: Tue, 2012-09-04 17:44
|
|
Serge D wrote:
thanks serge, it tooks me a cpl of hours to find about this |
|
|
hareslade
Joined: 2006-07-16
Posts: 20 |
Posted: Sat, 2012-08-18 12:08
|
|
hi, on gallery 3.0.4, can anyone tell me if they too get server error probs in php 5.3 with displaying greydragon theme, whereas php 5.2 works ok? see my posts a while back. i need to know whether its a php coding in the theme that doesn't agree with php 5.3, or if its just my host's setup parameters. the default theme works ok. |
|
|
undagiga
Joined: 2010-11-26
Posts: 693 |
Posted: Sat, 2012-08-18 13:37
|
|
I'm successfully running G3.0.4 with GD3.2.2 on PHP 5.3.14. But I had some issues. I upgraded to PHP 5.4.x and Gallery stopped working ( http://gallery.menalto.com/node/107557 ), so I downgraded to PHP 5.3.14. Most of my Gallery3 installs were ok after that, but one was corrupted. I didn't ever solve it - I refreshed the core and module files. See http://gallery.menalto.com/node/106269 |
|
|
hareslade
Joined: 2006-07-16
Posts: 20 |
Posted: Sun, 2012-08-19 17:36
|
|
thanks ungagiga i have tracked down the issue i have on 5.3 with greydragon theme, its certain [i hope] from my testing with 'die()', the prob is at the greydragon page.php.html where the page html tag is generated, $theme->html_attributes() throws the internal server error. so most calls to $theme->xyz() work, some do not. html_attributes is called in theme wind, and wind's page.php.html doesn't throw internal server error with $theme->html_attributes() on php 5.3, theres no actual 'html_attributes' function in gallery3 code, libraries/Theme_view.php obviously deals with it, as its mentioned inside 'function __call'. how to cure the prob? |
|
|
hareslade
Joined: 2006-07-16
Posts: 20 |
Posted: Sun, 2012-08-19 18:23
|
|
further on this 5.3 issue, I noticed greydragon_theme.php is totally empty, i put a an empty class class greydragon_theme_Core in there, possibly its done the trick..Gallery3 shows greydragon ok now.., but can someone tell me why I don't have to put anything inside the class! The gallery3 core class 'gallery_theme_Core' handles some of the theme calls i mention above, e.g $theme->head() Theme wind doesn't have an equivalent helper file class, but i'd place bets that other 3rd party themes do (or should have). It seems to be calls that return empty were messing up the server just on php 5.3..., e.g on both php5.2 and 5.3, I don't get any html inserted by $theme->html_attributes() on greydragon. Might be what the server does [internal error] if shorty tags are told to show empty output: <?= $something ?>, |
|
